acm-header
Sign In

Communications of the ACM

BLOG@CACM

Which Were the Most Influential Early Computers?


View as: Print Mobile App Share:
Herbert Bruderer

The following early machines had the greatest influence on the development of program-controlled computers:

  • ABC (Iowa State College, Ames, Iowa, 1942, see Fig. 1)
  • Colossus (Post Office Research Station, Dollis Hill, London, 1943, see Fig. 2)
  • Edvac (University of Pennsylvania in Philadelphia, 1952)
  • Eniac (University of Pennsylvania in Philadelphia, 1946, see Fig. 3)
  • Harvard Mark computers (Harvard University, Cambridge, Massachusetts, 1944) and
  • IAS computer (Institute for Advanced Study, Princeton, New Jersey, 1952).

 

 

Figure 1. The Atanasoff-Berry computer (ABC).

The binary vacuum tube computer of John Vincent Atanasoff and Clifford Edward Berry from Ames (Iowa) was reconstructed in 1996. The ABC is regarded as the world's first digital electronic computer.

Credit: Mark Richards/Computer History Museum, Mountain View, CA

 

Figure 2. The Colossus (reconstruction).

The Post Office Research Station built the first Colossus in a few months. This was the world's first large-scale vacuum tube computer.

Credit: The National Museum of Computing, Bletchley Park

 

Figure 3. The Eniac.

The vacuum tube computer, built at the University of Pennsylvania in Philadelphia, was programmed via pluggable cables.

Credit: U.S. Army

 

The comparatively small Atanasoff-Berry computer ABC apparently supplied decisive ideas for the design of the giant Eniac computer. The cumbersome operation of this colossus prompted the construction of the Edvac. The builders of the Eniac also constructed the binary Binac machine and the successful large-scale Univac computer.

Two lines of development evolved:

  • The serial Edvac with mercury delay line memory was the model for the British Edsac (see Fig. 4, as well as the Manchester Mark, Seac, Binac, and Univac, for examples).

 

Figure 4. The Edsac vacuum tube computer (reconstruction).

The Edsac 1 stored program electronic computer was developed under the supervision of Maurice Wilkes at Cambridge University.

Credit: The National Museum of Computing, Bletchley Park

 

  • The parallel IAS computer with electrostatic memory led to numerous replicas both in the U.S. (Avidac, IBM 701, Illiac, Johnniac, Maniac, Oracle, Ordvac, Swac, and Whirlwind) and in other countries: Besk (Sweden), Dask (Denmark), Silliac (Australia), Smil (Sweden), Weizac (Israel), etc.

The experiences with the—until-1975 secret—Colossus clearly inspired the construction of the Manchester Baby (1948) stored program computer, and also left their mark on the development of the Pilot Ace (1950, see Fig. 5).

 

Figure 5. The Pilot Ace.

Alan Turing designed the Automatic computing engine (Ace) at the National Physical Laboratory in London. The scaled-down functional trial machine was finished in 1950 following protracted delays.

The Pilot Ace is one of the few surviving electronic digital computers from the early days.

Credit: Science Museum, London/Science & society picture library

 

The little known Z3 (1945, see Fig. 6) machine of Konrad Zuse, which was destroyed in the war, had hardly any lasting influence on computer development. The Z4 inspired the construction of the Swiss Ermeth, but it also delayed its realization. Its successor was the Z5.

 

Figure 6. The Zuse Z3 (replica).

The Z3 (1941), destroyed in the Second World War, was the world's first programmable program-controlled binary digital computer, with floating point arithmetic. The relay machine was controlled from perforated tapes. It has no stored program.

Credit: Deutsches Museum, Munich

 

The analytical engine (1834, see Fig. 7) of Charles Babbage served as a model for the work of Leonardo Torres Quevedo. For a long time, Konrad Zuse had no knowledge of Charles Babbage. (See Konrad Zuse: Der Computer – Mein Lebenswerk, Springer-Verlag, Berlin, Heidelberg, fifth unrevised edition 2010, page 30). He only learned of the analytical engine in connection with a patent application for program control and arithmetic units through the American patent office. According to his biographer Bernard Cohen Howard Aiken, the co-designer oft he Harvard Mark 1/IBM ASCC relay computer, considered himself the successor to Babbage.

 

Figure 7. Babbage's analytical engine.

In 1834, the English mathematician Charles Babbage began with the development of this programmable, card-programmed calculating machine. Until his death in 1871, however, only a small part was realized. This machine is regarded as the ancestor of the modern-day computer.

Credit: Science Museum, London/Science & Society Picture Library

 

Source

Bruderer, Herbert: Milestones in Analog and Digital Computing, Springer Nature Switzerland AG, Cham, 3rd edition 2020, 2 volumes, 2113 pages, 715 illustrations, 151 tables, translated from the German by John McMinn, https://www.springer.com/de/book/9783030409739

 

Herbert Bruderer ([email protected]; [email protected]) is a retired lecturer in the Department of Computer Science at ETH Zurich and a historian of technology.


 

No entries found

Sign In for Full Access
» Forgot Password? » Create an ACM Web Account