Communications of the ACM
Review articles
Data Structures in the Multicore Age
Credit: Andy Gilmore
"Multicore processors are about to revolutionize the way we design and use data structures."
You might be skeptical of this statement; after all, are multicore processors not a new class of multiprocessor machines running parallel programs, just as we have been doing for more than a quarter of a century?
The answer is no. The revolution is partly due to changes multicore processors introduce to parallel architectures; but mostly it is the result of the change in the applications that are being parallelized: multicore processors are bringing parallelism to mainstream computing.
Before the introduction of multicore processors, parallelism was largely dedicated to computational problems with regular, slow-changing (or even static) communication and coordination patterns. Such problems arise in scientific computing or in graphics, but rarely in systems.
The future promises us multiple cores on anything from phones to laptops, desktops, and servers, and therefore a plethora of applications characterized by complex, fast-changing interactions and data exchanges.
Why are these dynamic interactions and data exchanges a problem? The formula we need in order to answer this question is called Amdahl's Law. It captures the idea that the extent to which we can speed up any complex computation is limited by how much of the computation must be executed sequentially.
Define the speedup S of a computation to be the ratio between the time it takes one processor to complete the computation (as measured by a wall clock) versus the time it takes n concurrent processors to complete the same computation. Amdahl's Law characterizes the maximum speedup S that can be achieved by n processors collaborating on an application, where p is the fraction of the computation that can be executed in parallel. Assume, for simplicity, that it takes (normalized) time 1 for a single processor to complete the computation. With n concurrent processors, the parallel part takes time p/n, and the sequential part takes time 1 - p. Overall, the parallelized computation takes time 
. Amdahl's Law says the speedup, that is, the ratio between the sequential (single-processor) time and the parallel time, is:
In other words, S does not grow linearly in n. For example, given an application and a 10-processor machine, Amdahl's Law says that even if we manage to parallelize 90% of the application, but not the remaining 10%, then we end up with a fivefold speedup, but not a 10-fold speedup. Doubling the number of cores to 20 will only raise us to a sevenfold speedup. So the remaining 10%, those we continue to execute sequentially, cut our utilization of the 10 processor machine in half, and limit us to a 10-fold speedup no matter how many cores we add.
What are the 10% we found difficult to parallelize? In many mainstream applications they are the parts of the program involving interthread interaction and coordination, which on multicore machines are performed by concurrently accessing shared data structures. Amdahl's Law tells us it is worthwhile to invest an effort to derive as much parallelism as possible from these 10%, and a key step on the way to doing so is to have highly parallel concurrent data structures.
Unfortunately, concurrent data structures are difficult to design. There is a kind of tension between correctness and performance: the more one tries to improve performance, the more difficult it becomes to reason about the resulting algorithm as being correct. Some experts blame the widely accepted threads-and-objects programming model (that is, threads communicating via shared objects), and predict its eventual demise will save us. My experience with the alternatives suggests this model is here to stay, at least for the foreseeable future. So let us, in this article, consider correctness and performance of data structures on multicore machines within the threads-and-objects model.
In the concurrent world, in contrast to the sequential one, correctness has two aspects: safety, guaranteeing that nothing bad happens, and liveness, guaranteeing that eventually something good will happen.
The safety aspects of concurrent data structures are complicated by the need to argue about the many possible interleavings of methods called by different threads. It is infinitely easier and more intuitive for us humans to specify how abstract data structures behave in a sequential setting, where there are no interleavings. Thus, the standard approach to arguing the safety properties of a concurrent data structure is to specify the structure's properties sequentially, and find a way to map its concurrent executions to these "correct" sequential ones. There are various approaches for doing this, called consistency conditions. Some familiar conditions are serializability, linearizability, sequential consistency, and quiescent consistency.
When considering liveness in a concurrent setting, the good thing one expects to happen is that method calls eventually complete. The terms under which liveness can be guaranteed are called progress conditions. Some familiar conditions are deadlock-freedom, starvation-freedom, lock-freedom, and wait-freedom. These conditions capture the properties an implementation requires from the underlying system scheduler in order to guarantee that method calls complete. For example, deadlock-free implementations depend on strong scheduler support, while wait-free ones do all the work themselves and are independent of the scheduler.
Finally, we have the performance of our data structures to consider. Historically, uniprocessors are modeled as Turing machines, and one can argue the theoretical complexity of data structure implementations on uniprocessors by counting the number of stepsthe machine instructionsthat method calls might take. There is an immediate correlation between the theoretical number of uniprocessor steps and the observed time a method will take.
In the multiprocessor setting, things are not that simple. In addition to the actual steps, one needs to consider whether steps by different threads require a shared resource or not, because these resources have a bounded capacity to handle simultaneous requests. For example, multiple instructions accessing the same location in memory cannot be serviced at the same time. In its simplest form, our theoretical complexity model requires us to consider a new element: stalls.2,7,8,9,10 When threads concurrently access a shared resource, one succeeds and others incur stalls. The overall complexity of the algorithm, and hence the time it might take to complete, is correlated to the number of operations together with the number of stalls (obviously this is a crude model that does not take into account the details of cache coherence). From an algorithmic design point of view, this model introduces a continuum starting from centralized structures where all threads share data by accessing a small set of locations, incurring many stalls, to distributed structures with multiple locations, in which the number of stalls is greatly reduced, yet the number of steps necessary to properly share data and move it around increases significantly.
How will the introduction of multicore architectures affect the design of concurrent data structures? Unlike on uniprocessors, the choice of algorithm will continue, for years to come, to be greatly influenced by the underlying machine's architecture. In particular, this includes the number of cores, their layout with respect to memory and to each other, and the added cost of synchronization instructions (on a multiprocessor, not all steps were created equal).
However, I expect the greatest change we will see is that concurrent data structures will go through a substantiative "relaxation process." As the number of cores grows, in each of the categories mentioned, consistency conditions, liveness conditions, and the level of structural distribution, the requirements placed on the data structures will have to be relaxed in order to support scalability. This will put a burden on programmers, forcing them to understand the minimal conditions their applications require, and then use as relaxed a data structure as possible in the solution. It will also place a burden on data structure designers to deliver highly scalable structures once the requirements are relaxed.
This article is too short to allow a survey of the various classes of concurrent data structures (such a survey can be found in Moir and Shavit17) and how one can relax their definitions and implementations in order to make them scale. Instead, let us focus here on one abstract data structurea stackand use it as an example of how the design process might proceed.
I use as a departure point the acceptable sequentially specified notion of a Stack<T> object: a collection of items (of type T) that provides push() and pop() methods satisfying the last-in-first-out (LIFO) property: the last item pushed is the first to be popped.
We will follow a sequence of refinement steps in the design of concurrent versions of stacks. Each step will expose various design aspects and relax some property of the implementation. My hope is that as we proceed, the reader will grow to appreciate the complexities involved in designing a correct scalable concurrent data-structure.
A Lock-based Stack
We begin with a LockBasedStack<T> implementation, whose Java pseudocode appears in figures 1 and 2. The pseudocode structure might seem a bit cumbersome at first, this is done in order to simplify the process of extending it later on.
The lock-based stack consists of a linked list of nodes, each with value and next fields. A special top field points to the first list node or is null if the stack is empty. To help simplify the presentation, we will assume it is illegal to add a null value to a stack.
Access to the stack is controlled by a single lock, and in this particular case a spin-lock: a software mechanism in which a collection of competing threads repeatedly attempt to choose exactly one of them to execute a section of code in a mutually exclusive manner. In other words, the winner that acquired the lock proceeds to execute the code, while all the losers spin, waiting for it to be released, so they can attempt to acquire it next.
The lock implementation must enable threads to decide on a winner. This is done using a special synchronization instruction called a compareAndSet() (CAS), available in one form or another on all of today's mainstream multicore processors. The CAS operation executes a read operation followed by a write operation, on a given memory location, in one indivisible hardware step. It takes two arguments: an expected value and an update value. If the memory location's value is equal to the expected value, then it is replaced by the update value, and otherwise the value is left unchanged. The method call returns a Boolean indicating whether the value changed. A typical CAS takes significantly more machine cycles than a read or a write, but luckily, the performance of CAS is improving as new generations of multicore processors role out.
In Figure 1, the push() method creates a new node and then calls tryPush() to try to acquire the lock. If the CAS is successful, the lock is set to true and the method swings the top reference from the current top-of-stack to its successor, and then releases the lock by setting it back to false. Otherwise, the tryPush() lock acquisition attempt is repeated. The pop() method in Figure 2 calls tryPop(), which attempts to acquire the lock and remove the first node from the stack. If it succeeds, it throws an exception if the stack is empty, and otherwise it returns the node referenced by top. If tryPop() fails to acquire the lock it returns null and is called again until it succeeds.
What are the safety, liveness, and performance properties of our implementation? Well, because we use a single lock to protect the structure, it is obvious its behavior is "atomic" (the technical term used for this is linearizable15). In other words, the outcomes of our concurrent execution are equivalent to those of a sequential execution in which each push or pop take effect at some non-overlapping instant during their method calls. In particular, we could think of them taking effect when the executing thread acquired the lock. Linearizability is a desired property because linearizable objects can be composed without having to know anything about their actual implementation.
But there is a price for this obvious atomicity. The use of a lock introduces a dependency on the operating system: we must assume the scheduler will not involuntarily preempt threads (at least not for long periods) while they are holding the lock. Without such support from the system, all threads accessing the stack will be delayed whenever one is preempted. Modern operating systems can deal with these issues, and will have to become even better at handling them in the future.
In terms of progress, the locking scheme is deadlock-free, that is, if several threads all attempt to acquire the lock, one will succeed. But it is not starvation-free: some thread could be unlucky enough to always fail in its CAS when attempting to acquire the lock.
The centralized nature of the lock-based stack implementation introduces a sequential bottleneck: only one thread at a time can complete the update of the data structure's state. This, Amdahl's Law tells us, will have a very negative effect on scalability, and performance will not improve as the number of cores/threads increases.
But there is another separate phenomenon here: memory contention. Threads failing their CAS attempts on the lock retry the CAS again even while the lock is still held by the last CAS "winner" updating the stack. These repeated attempts cause increased traffic on the machine's shared bus or interconnect. Since these are bounded resources, the result is an overall slowdown in performance, and in fact, as the number of cores increases, we will see performance deteriorate below that obtainable on a single core. Luckily, we can deal with contention quite easily by adding a contention manager into the code (Line 21 in figures 1 and 2).
The most popular type of contention manager is exponential backoff: every time a CAS fails in tryPush() or tryPop(), the thread delays for a certain random time before attempting the CAS again. A thread will double the range from which it picks the random delay upon CAS failure, and will cut it in half upon CAS success. The randomized nature of the backoff scheme makes the timing of the thread's attempts to acquire the lock less dependent on the scheduler, reducing the chance of threads falling into a repetitive pattern in which they all try to CAS at the same time and end up starving. Contention managers1,12,19 are key tools in the design of multicore data structures, even when no locks are used, and I expect them to play an even greater role as the number of cores grows.
A Lock-Free Stack
As noted, a drawback of our lock-based implementation, and in fact, of lock-based algorithms in general, is that the scheduler must guarantee that threads are preempted infrequently (or not at all) while holding the locks. Otherwise, other threads accessing the same locks will be delayed, and performance will suffer. This dependency on the capriciousness of the scheduler is particularly problematic in hard real-time systems where one requires a guarantee on how long method calls will take to complete.
We can eliminate this dependency by designing a lock-free stack implementation.23 In the LockFreeStack<T>, instead of acquiring a lock to manipulate the stack, threads agree who can modify it by directly applying a CAS to the top variable. To do so, we only need to modify the code for the tryPush() and tryPop() methods, as in Figure 3. As before, if unsuccessful, the method calls are repeated after backing off, just as in the lock-based algorithm.
A quick analysis shows the completion of a push (respectively pop) method call cannot be delayed by the preemption of some thread: the stack's state is changed by a single CAS operation that either completes or not, leaving the stack ready for the next operation. Thus, a thread can only be delayed by scheduling infinitely many calls that successfully modify the top of the stack and cause the tryPush() to continuously fail. In other words, the system as a whole will always make progress no matter what the scheduler does. We call this form of progress lock-freedom. In many data structures, having at least some of the structure's methods be lock-free tends to improve overall performance.
It is easy to see that the lock-free stack is linearizable: it behaves like a sequential stack whose methods "take effect" at the points in time where their respective CAS on the top variable succeeded (or threw the exception in case of a pop on an empty stack). We can thus compose this stack with other linearizable objects without worrying about the implementation details: as far as safety goes, there is no difference between the lock-based and lock-free stacks.
An Elimination Backoff Stack
Like the lock-based stack, the lock-free stack implementation scales poorly, primarily because its single point of access forms a sequential bottleneck: method calls can proceed only one after the other, ordered by successful CAS calls applied to the stack's lock or top fields. A sad fact we should acknowledge is this sequential bottleneck is inherent: in the worst case it takes a thread at least Ω (n) steps and/or stalls (recall, a stall is the delay a thread incurs when it must wait for another thread taking a step) to push or pop a linearizable lock-free stack.9 In other words, the theory tells us there is no way to avoid this bottleneck by distributing the stack implementation over multiple locations; there will always be an execution of linear complexity.
I expect the greatest change we will see is that concurrent data structures will go through a substantiative "relaxation process."
Surprisingly, though, we can introduce parallelism into many of the common case executions of a stack implementation. We do so by exploiting the following simple observation: if a push call is immediately followed by a pop call, the stack's state does not change; the two calls eliminate each other and it is as if both operations never happened. By causing concurrent pushes and pops to meet and pair up in separate memory locations, the thread calling push can exchange its value with a thread calling pop, without ever having to access the shared lock-free stack.
As depicted in Figure 4, in the EliminationBackoffStack<T>11 one achieves this effect by adding an EliminationArray to the lock-free stack implementation. Each location in the array is a coordination structure called an exchanger,16,18 an object that allows a pair of threads to rendezvous and exchange values.
Threads pick random array entries and try to pairup with complementary operations. The calls exchange values in the location in which they met, and return. A thread whose call cannot be eliminated, either because it has failed to find a partner, or because it found a partner with the wrong type of method call (such as a push meeting a push), can either try again to eliminate at a new location, or can access the shared lock-free stack. The combined data structure, array and stack, is linearizable because the lock-free stack is linearizable, and we can think of the eliminated calls as if they occurred at the point in which they exchanged values. It is lock-free because we can easily implement a lock-free exchanger using a CAS operation, and the shared stack itself is already lock-free.
In the EliminationBackoff-Stack, the EliminationArray is used as a backoff scheme to a shared lock-free stack. Each thread first accesses the stack, and if it fails to complete its call (that is, the CAS attempt on top fails) because there is contention, it attempts to eliminate using the array instead of simply backing off in time. If it fails to eliminate, it calls the lockfree stack again, and so on. A thread dynamically selects the subrange of the array within which it tries to eliminate, growing and shrinking it exponentially in response to the load. Picking a smaller subrange allows a greater chance of a successful rendezvous when there are few threads, while a larger range lowers the chances of threads waiting on a busy Exchanger when the load is high.
In the worst case a thread can still fail on both the stack and the elimination. However, if contention is low, threads will quickly succeed in accessing the stack, and as it grows, there will be a higher number of successful eliminations, allowing many operations to complete in parallel in only a constant number of steps. Moreover, contention at the lock-free stack is reduced because eliminated operations never access the stack. Note that we described a lock-free implementation, but, as with many concurrent data structures, on some systems a lock-based implementation might be more fitting and deliver better performance.
An Elimination Tree
A drawback of the elimination backoff stack is that under very high loads the number of un-eliminated threads accessing the shared lock-free stack may remain high, and these threads will continue to have linear complexity. Moreover, if we have, say, bursts of push calls followed by bursts of pop calls, there will again be no elimination and therefore no parallelism. The problem seems to be our insistence on having a linearizable stack: we devised a distributed solution that cuts down on the number of stalls, but the theoretical worst case linear time scenario can happen too often.
This leads us to try an alternative approach: relaxing the consistency condition for the stack. Instead of a linearizable stack, let's implement a quiescently consistent one.4,14 A stack is quiescently consistent if in any execution, whenever there are no ongoing push and pop calls, it meets the LIFO stack specification for all the calls that preceded it. In other words, quiescent consistency is like a game of musical chairs, we map the object to the sequential specification when and only when the music stops. As we will see, this relaxation will nevertheless provide quite powerful semantics for the data structure. In particular, as with linearizability, quiescent consistency allows objects to be composed as black boxes without having to know anything about their actual implementation.
Consider a binary tree of objects called balancers with a single input wire and two output wires, as depicted in Figure 5. As threads arrive at a balancer, it repeatedly sends them to the top wire and then the bottom one, so its top wire always has one more thread than the bottom wire. The Tree [k] network is a binary tree of balancers constructed inductively by placing a balancer before two Tree [k/2] networks of balancers and not shuffling their outputs.22
We add a collection of lock-free stacks to the output wires of the tree. To perform a push, threads traverse the balancers from the root to the leaves and then push the item onto the appropriate stack. In any quiescent state, when there are no threads in the tree, the output items are balanced out so that the top stacks have at most one more than the bottom ones, and there are no gaps.
We can implement the balancers in a straightforward way using a bit that threads toggle: they fetch the bit and then complement it (a CAS operation), exiting on the output wire they fetched (zero or one). How do we perform a pop? Magically, to perform a pop threads traverse the balancers in the opposite order of the push, that is, in each balancer, after complementing the bit, they follow this complement, the opposite of the bit they fetched. Try this; you will see that from one quiescent state to the next, the items removed are the last ones pushed onto the stack. We thus have a collection of stacks that are accessed in parallel, yet act as one quiescent LIFO stack.
The bad news is that our implementation of the balancers using a bit means that every thread that enters the tree accesses the same bit in the root balancer, causing that balancer to become a bottleneck. This is true, though to a lesser extent, with balancers lower in the tree.
We can parallelize the tree by exploiting a simple observation similar to one we made about the elimination backoff stack:
If an even number of threads passes through a balancer, the outputs are evenly balanced on the top and bottom wires, but the balancer's state remains unchanged.
The idea behind the EliminationTree20,22 is to place an EliminationArray in front of the bit in every balancer as in Figure 6. If two popping threads meet in the array, they leave on opposite wires, without a need to touch the bit, as anyhow it would have remained in its original state. If two pushing threads meet in the array, they also leave on opposite wires. If a push or pop call does not manage to meet another in the array, it toggles the bit and leaves accordingly. Finally, if a push and a pop meet, they eliminate, exchanging items as in the EliminationBackoffStack. It can be shown that this implementation provides a quiescently consistent stack,a in which, in most cases, it takes a thread O(log k) steps to complete a push or a pop, where k is the number of lock-free stacks on its output wires.
A Pool Made of Stacks
The collection of stacks accessed in parallel in the elimination tree provides quiescently consistent LIFO ordering with a high degree of parallelism. However, each method call involves a logarithmic number of memory accesses, each involving a CAS operation, and these accesses are not localized, that is, threads are repeatedly accessing locations they did not access recently.
This brings us to the final two issues one must take into account when designing concurrent data structures: the machine's memory hierarchy and its coherence mechanisms. Mainstream multicore architectures are cache coherent, where on most machines the L2 cache (and in the near future the L3 cache as well) is shared by all cores. A large part of the machine's performance on shared data is derived from the threads' ability to find the data cached. The shared caches are unfortunately a bounded resource, both in their size and in the level of access parallelism they offer. Thus, the data structure design needs to attempt to lower the overall number of accesses to memory, and to maintain locality as much as possible.
What are the implications for our stack design? Consider completely relaxing the LIFO property in favor of a Pool<T> structure in which there is no temporal ordering on push() and pop() calls. We will provide a concurrent lock-free implementation of a pool that supports high parallelism, high locality, and has a low cost in terms of the overall number of accesses to memory. How useful is such a concurrent pool? I would like to believe that most concurrent applications can be tailored to use pools in place of queues and stacks (perhaps with some added liveness conditions)...time will tell.
Our overall concurrent pool design is quite simple. As depicted in Figure 7, we allocate a collection of n concurrent lock-free stacks, one per computing thread (alternately we could allocate one stack per collection of threads on the same core, depending on the specific machine architecture). Each thread will push and pop from its own assigned stack. If, when it attempts to pop, it finds its own stack is empty, it will repeatedly attempt to "steal" an item from another randomly chosen stack.b The pool has, in the common case, the same O(1) complexity per method call as the original lockfree stack, yet provides a very high degree of parallelism. The act of stealing itself may be expensive, especially when the pool is almost empty, but there are various techniques to reduce the number of steal attempts if they are unlikely to succeed. The randomization serves the purpose of guaranteeing an even distribution of threads over the stacks, so that if there are items to be popped, they will be found quickly. Thus, our construction has relaxed the specification by removing the causal ordering on method calls and replacing the deterministic liveness and complexity guarantees with probabilistic ones.
As the reader can imagine, the O(1) step complexity does not tell the whole story. Threads accessing the pool will tend to pop items that they themselves recently pushed onto their own designated stack, therefore exhibiting good cache locality. Moreover, since chances of a concurrent stealer are low, most of the time a thread accesses its lock-free stack alone. This observation allows designers to create a lockfree "stack-like" structure called a Dequec that allows the frequently accessing local thread to use only loads and stores in its methods, resorting to more expensive CAS based method calls only when chances of synchronization with a conflicting stealing thread are high.3,6
The end result is a pool implementation that is tailored to the costs of the machine's memory hierarchy and synchronization operations. The big hope is that as we go forward, many of these architecture-conscious optimizations, which can greatly influence performance, will move into the realm of compilers and concurrency libraries, and the need for everyday programmers to be aware of them will diminish.
What Next?
The pool structure ended our sequence of relaxations. I hope the reader has come to realize how strongly the choice of structure depends on the machine's size and the application's concurrency requirements. For example, small collections of threads can effectively share a lock-based or lock-free stack, slightly larger ones an elimination stack, but for hundreds of threads we will have to bite the bullet and move from a stack to a pool (though within the pool implementation threads residing on the same core or machine cluster could use a single stack quite effectively).
In the end, we gave up the stack's LIFO ordering in the name of performance. I imagine we will have to do the same for other data structure classes. For example, I would guess that search structures will move away from being comparison based, allowing us to use hashing and similar naturally parallel techniques, and that priority queues will have a relaxed priority ordering in place of the strong one imposed by deleting the minimum key. I can't wait to see what these and other structures will look like.
As we go forward, we will also need to take into account the evolution of hardware support for synchronization. Today's primary construct, the CAS operation, works on a single memory location. Future architectures will most likely support synchronization techniques such as transactional memory,13,21 allowing threads to instantaneously read and write multiple locations in one indivisible step. Perhaps more important than the introduction of new features like transactional memory is the fact that the relative costs of synchronization and coherence are likely to change dramatically as new generations of multicore chips role out. We will have to make sure to consider this evolution path carefully as we set our language and software development goals.
Concurrent data structure design has, for many years, been moving forward at glacial pace. Multicore processors are about to heat things up, leaving us, the data structure designers and users, with the interesting job of directing which way they flow. Let's try to get it right.
References
1. Agarwal, A. and Cherian, M. Adaptive backoff synchronization techniques. In Proceedings of the 16th International Symposium on Computer Architecture (May 1989), 396406.
2. Anderson, J. and Kim, Y. An improved lower bound for the time complexity of mutual exclusion. In Proceedings of the 20th Annual ACM Symposium on Principles of Distributed Computing (2001), 9099.
3. Arora, N.S., Blumofe, R.D. and Plaxton, C.G. Thread scheduling for multiprogrammed multiprocessors. Theory of Computing Systems 34, 2 (2001), 115144.
4. Aspnes, J., Herlihy, M. and Shavit, N. Counting networks. J. ACM 41, 5 (1994), 10201048.
5. Blumofe, R.D. and Leiserson, C.E. Scheduling multithreaded computations by work stealing. J. ACM 46, 5 (1999), 720748.
6. Chase, D. and Lev, Y. Dynamic circular work-stealing deque. In Proceedings of the 17th Annual ACM Symposium on Parallelism in Algorithms and Architectures (2005). ACM Press, NY, 2128.
7. Cypher, R. The communication requirements of mutual exclusion. In ACM Proceedings of the Seventh Annual Symposium on Parallel Algorithms and Architectures (1995), 147156.
8. Dwork, C., Herlihy, M. and Waarts, O. Contention in shared memory algorithms. J. ACM 44, 6 (1997), 779805.
9. Fich, F.E., Hendler, D. and Shavit, N. Linear lower bounds on real-world implementations of concurrent objects. In Proceedings of the 46th Annual IEEE Symposium on Foundations of Computer Science (2005). IEEE Computer Society, Washington, D.C., 165173.
10. Gibbons, P.B., Matias, Y. and Ramachandran, V. The queue-read queue-write PRAM model: Accounting for contention in parallel algorithms. SIAM J. Computing 28, 2 (1999), 733769.
11. Hendler, D., Shavit, N. and Yerushalmi, L. A scalable lock-free stack algorithm. J. Parallel and Distributed Computing 70, 1 (Jan. 2010), 112.
12. Herlihy, M., Luchangco, V., Moir, M. and Scherer III, W.N. Software transactional memory for dynamic-sized data structures. In Proceedings of the 22nd Annual Symposium on Principles of Distributed Computing. ACM, NY, 2003, 92101.
13. Herlihy, M. and Moss, E. Transactional memory: architectural support for lock-free data structures. SIGARCH Comput. Archit. News 21, 2 (1993), 289300.
14. Herlihy, M. and Shavit, N. The Art of Multiprocessor Programming. Morgan Kaufmann, San Mateo, CA, 2008.
15. Herlihy, M. and Wing, J. Linearizability: A correctness condition for concurrent objects. ACM Trans. Programming Languages and Systems 12, 3 (July 1990), 463492.
16. Moir, M., Nussbaum, D., Shalev, O. and Shavit, N. Using elimination to implement scalable and lock-free fifo queues. In Proceedings of the 17th Annual ACM Symposium on Parallelism in Algorithms and Architectures. ACM Press, NY, 2005, 253262.
17. Moir, M. and Shavit, N. Concurrent data structures. Handbook of Data Structures and Applications, D. Metha and S. Sahni, eds. Chapman and Hall/CRC Press, 2007, 4714, 4730.
18. Scherer III, W.N., Lea, D. and Scott, M.L. Scalable synchronous queues. In Proceedings of the 11th ACM SIGPLAN Symposium on Principles and Practice of Parallel Programming. ACM Press, NY, 2006, 147156.
19. Scherer III, W.N. and Scott, M.L. Advanced contention management for dynamic software transactional memory. In Proceedings of the 24th Annual ACM Symposium on Principles of Distributed Computing. ACM, NY, 2005, 240248.
20. Shavit, N. and Touitou, D. Elimination trees and the construction of pools and stacks. Theory of Computing Systems 30 (1997), 645670.
21. Shavit, N. and Touitou, D. Software transactional memory. Distributed Computing 10, 2 (Feb. 1997), 99116.
22. Shavit, N. and Zemach, A. Diffracting trees. ACM Transactions on Computer Systems 14, 4 (1996), 385428.
23. Treiber, R.K. Systems programming: Coping with parallelism. Technical Report RJ 5118 (Apr. 1986). IBM Almaden Research Center, San Jose, CA.
Footnotes
a. To keep things simple, pop operations should block until a matching push appears.
c. This Deque supports push() and pop() methods with the traditional LIFO semantics and an additional popTop() method for stealers that pops the first-in (oldest) item.5
Figures
Figure 1. A lock-based Stack<T>: in the push() method, threads alternate between trying to push an item onto the stack and managing contention by backing off before retrying after a failed push attempt.
Figure 2. The lock-based Stack<T>: The pop() method alternates between trying to pop and backing off before the next attempt.
Figure 3. The lock-free tryPush() and tryPop() methods.
Figure 4. The EliminationBackoffStack<T>.
Figure 5. A Tree [4] network leading to four lock-free stacks.
©2011 ACM 0001-0782/11/0300 $10.00
Permission to make digital or hard copies of part or all of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and full citation on the first page. Copyright for components of this work owned by others than ACM must be honored. Abstracting with credit is permitted. To copy otherwise, to republish, to post on servers, or to redistribute to lists, requires prior specific permission and/or fee. Request permission to publish from [email protected] or fax (212) 869-0481.
The Digital Library is published by the Association for Computing Machinery. Copyright © 2011 ACM, Inc.
Comments
Roger Scott
Despite the statement "It is easy to see that the lock-free stack is linearizable", in fact the lock-free stack implementation presented here is not linearizable and will not work reliably. Consider that the starting state of the stack 'stack' is a single node which we shall call 'A'. A call to stack.pop() occurs in thread #1. After line 17 of figure 3 the variable 'oldTop' will refer to node 'A' and the variable 'newTop' will be null. Between lines 17 and 18 the scheduler suspends execution of thread 1 and resumes execution of thread 2, which proceeds to execute the following sequence:
x = stack.pop();
y = new Node;
stack.push(y);
stack.push(x);
such that the stack now contains the original 'A' node whose 'next' field pointrs to a second node which we shall call 'B'. At this point the scheduler resumes the execution of thread #1. The compareAndSet operation on line 18 will find that 'top' is, indeed, equal to 'oldTop' (since it is not "still", but, rather, "once again" 'A') so it will proceed to replace it with 'newTop', in other words, null. Node 'B' will thus be lost. This might be detected between lines 18 and 19 with
assert(oldTop.next == newTop);
The basic problem here is that the stack data structure is not just the head of the list (the 'top' variable) but also all of the 'next' links in all of the nodes on the stack at any given time. Consequently, it is necessary to synchronize access to *all* of these variables, which is most likely a losing proposition.
Even if you allow that the node objects are only created by push() there is still a very real chance that the node created to hold the content (or "payload") of 'A' in this example will have the same object identity (i.e., ==) the node created by the push() that follows the push() for 'B'.
Roger Scott
Coverity, Inc.
Anonymous
Thanks Roger. You are correct, this is not working code, which is why I make sure to say it is Java Pseudocode.
The problem you mention is the classic ABA problem with respect to the use of a CAS operation (see section dealing with ABA in the "Art of Multiprocessor Programming.") It is beyond the scope of the article to deal with ABA, as this would require defining the variables as atomicStampedReferences, which have a weird Java interface that would completely clutter the code and presentation.
I hope you will forgive me for not putting in a specific comment about this, another reader also emailed me about this issue. I did not realize it would be an issue given that this is not intended to be working code.
Thanks for your comment. -- Nir Shavit
Anonymous
Is there or will there be a paper describing the "Pool Made of Stacks" data structure?
Seems to me that this structure can also function as a NZI (non-zero indicator) with very little modification.
Anonymous
I am not sure if I misunderstood the argument made by Roger, but stack.push method takes the value, not the node itself as an argument. The node object is created by the push method and passed along to tryPush - this ensures that only the thread doing the push has the reference to that node object, and no other thread. Similarly, tryPop discards the node object, and returns only the value, and not the node itself. This further implies that during the entire lifetime of the stack, a node can appear at only one "position" in the stack - in other words, the node's "next" field never changes after the node is created and placed in the stack for the first time. So, the argument that a different "next" field results in the node B above being lost does not hold.
Of course, nodes don't just get created forever - they are reused since managed environments like Java have automatic memory management. But the very nature of the garbage collector ensures that a node (i.e. a memory location for that node object) can only be reused if there are no more references to that node.
So, as far as I can see, the code in the paper really is working code.
Sorry if I missed something, thanks -- Aleksandar Prokopec
Anonymous
You might be interested in my response to this article "Concurrent Stack Does Not Exist":
http://yinwang0.wordpress.com/2012/04/17/concurrent-stack
CACM Administrator
The following letter was published in the Letters to the Editor in the June 2011 CACM (http://cacm.acm.org/magazines/2011/6/108669).
--CACM Administrator
Nir Shavit's article "Data Structures in the Multicore Age" (Mar. 2011) was a thrill to read; so, too, was the timely Viewpoint "Managing Time" by Peter J. Denning, the article "Understanding Scam Victims: Seven Principles for Systems Security" by Frank Stajano and Paul Wilson, the Technical Perspective "VL2" by Jennifer Rexford, and the article "VL2: A Scalable and Flexible Data Center Network" by Albert Greenberg et al.
I was especially intrigued by Shavit's exposition on concurrent objects. I first encountered lock-free and wait-free protocols in a 1993 article by Maurice Herlihy,(1) using load-linked and store-conditional instructions. Thanks now to Shavit for explaining additional techniques, including exchangers and balancers.
Also important is to point out that Shavit's pseudocode for the lock-free stack included an unstated restriction that a node, once popped, never goes back on the stack the ABA problem; see the related Communications blog page http://cacm.acm.org/magazines/2011/3/105308-data-structures-in-the-multicore-age/comments, as well as Herlihy's and Shavit's 2008 book.(2)
The key point is that concurrent data structures are more difficult than they might first seem, as I discussed in my own 1995 article(3) and that it is easy to introduce subtle bugs, especially when all important assumptions are not stated or enforced; in this case, that a node, once popped, never goes back on the stack.
Joseph P. Skudlarek
Lake Oswego, OR
REFERENCES
(1) Herlihy, M. P. A methodology for implementing highly concurrent data objects. ACM Transactions on Programming Languages and Systems (Nov. 1993).
(2) Herlihy, M. P. and Shavit, N. The Art of Multiprocessor Programming. Morgan Kaufmann, San Mateo, CA, 2008.
(3) Skudlarek, J. P. Notes on a methodology for implementing highly concurrent data objects. ACM Transactions on Programming Languages and Systems (Jan. 1995).
CACM Administrator
The following letter was published in the Letters to the Editor in the May 2011 CACM (http://cacm.acm.org/magazines/2011/5/107681).
--CACM Administrator
The lock-free pop operation Nir Shavit described in his article "Data Structures in the Multicore Age" (Mar. 2011) depends on the semantics of the Java implementation in an important way. The push operation allocates a new node object during the call, and it is this object that is placed on the stack. In addition, the assignment of oldTop at line 13 creates a reference to the top node, keeping it alive until the return from the function.
This is of interest because if any of these constraints is not true, the pop operation would not work. In particular, if one would naively implement a push-and-pop mechanism along these lines in a language like C++, and let the clients provide the object to be pushed, and returned that object to the clients when the pop occurred, the program would be wrong. This is because after fetching oldTop (line 13) and newTop (line 17) other threads could remove the top node, remove or push other nodes, then push the top node again. The compareAnd-Set would then succeed, even though newTop was no longer the correct new value. Similarly, if the implementation allocated a node in push, and freed it in pop, the program would be wrong because the freed-node storage might be reused in a subsequent push, leading to the same error.
The Java implementation also involves hidden costs, including allocation and garbage collection of the node objects and concurrency control required in the memory-allocation system to make it work. These costs must be considered, as they are essential to the correctness of the program. Be warned about not using apparently identical algorithms that do not satisfy the hidden constraints.
Marc Auslander
Yorktown Heights, NY
Displaying all 7 comments